ZWRZ Self-aligning roller bearing 23064

1.Can make selfalingnment. 2.Rolling elemtnts linearly come into contact with the raceways of inner and outer ring.

1,Dimension

Overall dimension of bearing listed in beaing table accords to ISO015-1981.

2,Angular alignment tolerance

Self-aligning roller bearing is designed in such a way that it is self-aligning.That means that bearing can adjust itself and angular alignment tolerance between outer rings.Under normal load and working condition and inner ring rotates,the unsymmetrical value listed in below table is allowed.Achieving completely specifide value is subject to design and seal type of configured bearing.

3,Tolerance

The self-anligning roller bearing with cylindrical bore or tapered core is of common tolerance level .

4,Internal clearance

 According to the ZWRZ standard,self-aligning roller bearing is of common tolerance level in internal clearance in its radial direction.Almost all bearings can be supplied at C3 clearance,or even higher level C4 clearance.Bearings with dimension less than common level:C2 clearance can also be supplide.Please consult first to check supply status for bearing with non-standard radial clearance (includingC5).These clearance values are used for zero load testing and shaft,which remains uninstalled.

Type	d(mm)	D(mm)	B(mm)	Type	d(mm)	D(mm)	B(mm)
23022	110	170	45	23064	320	480	121
23024	120	180	46	23068	340	520	133
23026	130	200	52	23072	360	540	134
23028	140	210	53	23076	380	560	135
23030	150	225	56	23080	400	600	148
23032	160	240	60	23084	420	620	150
23034	170	260	67	23092	460	680	163
23036	180	280	74	23096	480	700	165
23038	190	290	75	230/500	500	720	167
23040	200	310	82	230/530	530	780	185
23048	240	360	92	230/560	560	780	185
23052	260	400	104	230/600	600	870	200
23056	280	420	106	230/630	630	920	212
23060	300	460	118	230/670	670	980	230

ZWRZ Self-aligning roller bearing 23064